For simpleusb, replace the word "radio" with "susb" ...Like:

asterisk> susb active usb
asterisk> susb tune save

And, the written config files will be like: simpleusb_tune_xxxx.conf



On Sat, 21 May 2016, Steve Agee wrote:

Yes, and this works if everything is USBRADIO. But remember, one is 
USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.

N5ZUA

On 5/21/2016 5:13 PM, David McGough wrote:

For any of the AllStar releases:

Launch Asterisk from the command prompt.

asterisk> radio active usb
asterisk> radio tune save

If two URI's are attached, perform:

asterisk> radio active usb1
asterisk> radio tune save

If three URI's are attached, perform:

asterisk> radio active usb2
asterisk> radio tune save

...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with
what the AllStar software interprets the various devstr parameters to be.

asterisk> exit

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.