Corey,

Check The BAUD RATE of your gps - see your manual appendix pg 33
I don't know what the rate needs to be for rtcm.
Likely the reason you see no output assuming the output is turned on.

Perhaps someone else can chime in on this.

...mike/kb8jnm

-------- Original Message --------
Subject: Re: [App_rpt-users] Gps18 lvc
From: "COREY BADGLEY" <kc7mrq@bresnan.net>
Date: Sat, November 01, 2014 10:51 am
To: <mike@midnighteng.com>


The rtcm interface is set up but I'm wondering if the gps require
initialization. No Data on rxd or a one sec pps when I hook the gps up to
power

On Sat, 01 Nov 2014 07:31:21 -0700
<mike@midnighteng.com> wrote:
>
>
> Corey,Not familiar with the model but do you need to go through the menu and
>turn on (enable) the data interface ?
> ...mike/kb8jnm
>
> -------- Original Message --------
> Subject: [App_rpt-users] Gps18 lvc
> From: "COREY BADGLEY" <kc7mrq@bresnan.net>
> Date: Sat, November 01, 2014 9:48 am
> To: app_rpt-users@ohnosec.org
>
>
> I purchased two garmin 18 lvc to hook to a rtcm. No data output on rxd or
>pps
> when I apply 5v. Is there a step I a step I am missing when hooking them up?
>
>
> Best regards,
>
> Corey Badgley
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>the bottom of the page. Enter your email address and press the "Unsubscribe
>or edit options button"
> You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message to the
>list detailing the problem.
>

Best regards,

Corey Badgley