Finally got Limey on the machine..
 
(Did it with ubuntu live cd , took sometime to figure out where the damn drive was hidden but I got it..)
 
Limey wont boot properly, it stop at :
 
isapnp:No plug & Play device found
 
So from what I understand, since it wont see a URI connected to the machine, it wont continu booting.
 
I dont want to use a URI i want to use the onboard audio and the onboard serial port for ptt/cor.. too bad, will have to find something else..
 
Unless someone ahve a solution ;-))))
 
that would be a very nice xmass present ;-))
 
Pierre
 
VE2PF
 
 
 
From: Tim Sawyer
Sent: Saturday, December 24, 2011 11:21 PM
To: pete M
Cc: APP RPT
Subject: Re: [App_rpt-users] Limey Linux on a HP T5630 Thin Client
 
I built a ribbon cable with two 44 pin connectors on it for just that task.  That way I can use my Mac. On CentOS I'm not sure where your removable media will be... maybe in /dev/disk/something?
 
--
Tim
:wq
 
On Dec 24, 2011, at 11:27 AM, pete M wrote:

ok ,
 
I have some problem here..
 
Since my t5630 flash drive have a connector that is exactly like the connector that usely is on the end of a ide 44 pin cable I cant connect it to my usb adaptor and dd the limey image to the flash drive.
 
so I have to do it from the machine itself.
 
so to do so I downloaded ubuntu live cd to boot from a dvd reader and I have limey tar file on a usb stick.
 
I try to find where the hell in monted the damn ide flash disk and just cant.. I do have an Icone on the desktop but its a symlink and cant find where its pointing..
 
So I am right now downloading the centos 5.5 live dvd, hoping it will be more clear where the damn thing is..
 
I tried ide0 no go, ide1 not better..
 
Anyone can help??
 
And By the way
 
Have a merry Xmass to everyone on the list
 
Pierre Martel
 
VE2PF
 
Sent: Wednesday, December 21, 2011 3:55 PM
Subject: RE: [App_rpt-users] Limey Linux on a HP T5630 Thin Client
 
The probably easiest way to get an answer to your question is to determine
it emperically.  Download the following image:

http://stats.allstarlink.org/limeylinux/downloads/cfimg-i586-via-1.1.5.tar.gz

and IMAGE copy it (after un-tarring) to the flash drive (using dd or equivalent).

If it boots, and "talks" to the ethernet, etc, then it works.
Otherwise, it doesnt.

JIM WB6NIL


From: petem001@hotmail.com
To: app_rpt-users@ohnosec.org
Date: Wed, 21 Dec 2011 15:46:27 -0500
Subject: [App_rpt-users] Limey Linux on a HP T5630 Thin Client

I Have a few T5630 thin client that was donated to me (spec: 1ghz CPU , 1 gig of ram, 1 Gig flash drive)
 
they have a VIA chipset that have Video , network, and audio device
 
I am wondering if I could use that thin client with Limey to do a Allstar node AND an echolink node..
 
I would connect that to port 3 of my rc210 controler that I have for my 2 M and 70 cm repeater’s.
 
If possible, how to i build the thing??
 
I know a few thing about Linux but I am no way a guru.. I do prefer a windows machine, but I know that Linux in more stable..
 
So is it possible or am I dreaming?
 
forgot to tell you that there is a serial and printerl port to the machine
 
you can see the spec there:
 
 
 
 
Pierre
 
VE2PF
 
 
 
 

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users