From: N7LD@aol.com
Date: Sun, 3 Nov 2013 11:24:30 -0500
Subject: Re: [App_rpt-users] simpleusb
To: doug@crompton.com
What I have done is enter nodesetup and it then asks you if you want
simpleusb.
It changes it for you and then you can bail out of it.
Lee
In a message dated 11/2/2013 11:13:25 P.M. Pacific Standard Time,
doug@crompton.com writes:
Just a note that as stated on this page
-
http://ohnosec.org/drupal/node/193
I had no simpleusb
sample file in the asterisk source configs directory in my install of the
latest acid release. Only the USBradio sample file was there.
Also no
/etc/init.d/usbradio or /etc/init.d/simpleusb
I do have
/usr/lib/asterisk/modules/chan_simpleusb.so
Is this note valid for the
current acid install? What is the procedure to switch to simpleusb?
Do
I just need to change rename usbradio.conf, insert and modify
simpleusb.conf, and set rxchannel = SimpleUSB/usb in
rtp.conf ?
The PDF of the page is attached.
73
Doug
WA3DSP
http://www.crompton.com/hamradio
=
_______________________________________________
App_rpt-users
mailing
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users