Doug,
If you don't mind shutting down asterisk you can test with
netcat. have netcat listen on 4569 udp and then connect to it
from the external box with netcat in client mode. type some stuff
on standard in and see if it shows up on the server on standard
out.
Server
bryan@keekles:~$ netcat -lu 4569
testing to the server
Client
bryan@keekles:~$ netcat -u 192.168.1.2 4569
testing to the server
This will isolate it down to the network.
On 1/10/14 10:41 PM, Doug Crompton wrote:
I am remotely trying
to troubleshoot a friends new Allstar installation. I can ssh
in and connect out to nodes but I cannot connect in to the
system from external nodes. Port 4569 is forwarded.
I discovered this link -
http://www.voip-info.org/wiki/view/IAX
about consistent NAT and I was wondering if that might be the
problem.
I was able to connect in one time right after a reboot which
might support the NAT issue.
The router is an Actiontek MI424WR GigE as supplied by
Verizon on their FIOS system.
Is anyone else having a problem with this router or have any
ideas on this?
Nothing is logged at the server or
shows up in the client on the system which kind of points to a
routing failure.
Is there a good way to check for
open port 4569 as I don't think normal port scan programs will
check this.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net