I would think that perhaps when you swapp in the ther fob, that the usb port changes. If you go into the tune menu and do a radio save it might save the new usb slot to your node.

Jon RQ

On 10/9/2018 1:07 AM, TGundo 2003 wrote:
Is there something special that needs to be done when switching audio FOB's on a Pi?

I had a RIM-7330 with an intermittent USB jack. Received a replacement, swapped it in, everything works except TX audio (from the radio into the RIM, more likely it's not reacting to the PTT logic). When I put the old one back in it worked fine (other than having to hold the USB jack just right). Put the new one back on still no luck.

Scott at RB (Who probably thinks I am crazy at this point) was kind enough to send me another RIM-7330 as well as a RIM-Lite. Put the next RIM-7330 in, same issue! Tonight I made up the cable to try the RIM-Lite, Same issue again!

I've tried 5 different USB cables, rebooted many times, every basic thing I can think of. It's like it does not want to recognize the PTT output as COS on the RIM. The PTT logic is working on the controller, even tried another port. Strange thing is it will occasionally work, no rhyme or reason, and can quit working mid-sentence.

Is there somewhere in the config I need to clear the old RIM out of the file? Is it done by a device ID somewhere? 

Thanks
Tom
W9SRV


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.