MP3 from the asterisk 1.4 add-ons has worked fine for me on
several machines but in any case I have a stop playback command
Cop 24 does it. I used 999 for the function but that is probably
not a good choice any more
999=cop,24
Ken
cop
(control operator) cmds:
*
*
1 - System warm boot
*
2 - System enable
*
3 - System disable
*
4 - Test Tone On/Off
*
5 - Dump System Variables on Console (debug)
*
6 - PTT (phone mode only)
*
7 - Time out timer enable
*
8 - Time out timer disable
*
9 - Autopatch enable
*
10 - Autopatch disable
*
11 - Link enable
*
12 - Link disable
*
13 - Query System State
*
14 - Change System State
*
15 - Scheduler Enable
*
16 - Scheduler Disable
*
17 - User functions (time, id, etc) enable
*
18 - User functions (time, id, etc) disable
*
19 - Select alternate hang timer
*
20 - Select standard hang timer
*
21 - Enable Parrot Mode
*
22 - Disable Parrot Mode
*
23 - Birdbath (Current Parrot Cleanup/Flush)
*
24 - Flush all telemetry
*
25 - Query last node un-keyed
*
26 - Query all nodes keyed/unkeyed
*
27 - Reset DAQ minimum on a pin
*
28 - Reset DAQ maximum on a pin
*
30 - Recall Memory Setting in Attached Xcvr
*
31 - Channel Selector for Parallel Programmed Xcvr
*
32 - Touchtone pad test: command + Digit string + # to playback all digits
pressed
*
33 - Local Telemetry Output Enable
*
34 - Local Telemetry Output Disable
*
35 - Local Telemetry Output on Demand
*
36 - Foreign Link Local Output Path Enable
*
37 - Foreign Link Local Output Path Disable
*
38 - Foreign Link Local Output Path Follows Local Telemetry
*
39 - Foreign Link Local Output Path on Demand
*
40 - IRLP announce Enable
*
41 - IRLP announce Disable
*
42 - Echolink announce node # only
*
43 - Echolink announce node Callsign only
*
44 - Echolink announce node # & Callsign
*
45 - Link Activity timer enable
*
46 - Link Activity timer disable
*
47 - Reset "Link Config Changed" Flag
*
48 - Send Page Tone (Tone specs separated by parenthesis)
*
49 - Disable incoming connections (control state noice)
*
50 - Enable incoming connections (control state noicd)
*
51 - Enable sleep mode
*
52 - Disable sleep mode
*
53 - Wake up from sleep
*
54 - Go to sleep
*
55 - Parrot Once if parrot mode is disabled
From:
app_rpt-users-bounces@qrvc.com [mailto:app_rpt-users-bounces@qrvc.com] On
Behalf Of KI6PSP (Ed)
Sent: Sunday, October 03, 2010 1:02 AM
To: app_rpt-users@qrvc.com
Subject: [App_rpt-users] Is there a "Be Quiet" command?
I setup a script to re-transmit the ARRL Audio news on the
club Allstar Node. Here is my question, is there a way to kill playback of a
file, in case there is emergancy traffic during the news? I tried the Parrot
Kill command with no effect.