Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good.

Thanks,
Bob
kk6ecm

Sent from iPad


On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:

i take this box
 
http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/dc3217iye-product-brief.pdf
 
73 de tom dh6mbt
Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com]
Gesendet: Dienstag, 3. Juni 2014 12:59
An: App_rpt-users@ohnosec.org
Betreff: Re: [App_rpt-users] no audio from URI

I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing).

Thanks,
Bob
kk6ecm

Sent from iPad


On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:

good morning,
i connect a headphone to the URI so we don`t need to search the problem on the Motorolas....
 
73...
 
Von: David Morley [ab8tn1@cox.net]
Gesendet: Dienstag, 3. Juni 2014 07:14
An: torben@klimt-online.com
Betreff: Re: [App_rpt-users] no audio from URI

Are the GM 360s the same as the GM 300s?  Do they have 16 pin connectors 

Sent from my iPhone


On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:

Hi all,

i think i have a little blackout L

I would like to set up a repeater with 2 GM360

<!--[if !supportLists]-->-          <!--[endif]-->SQL detect is ok

<!--[if !supportLists]-->-          <!--[endif]-->NF to another connectet repeater is ok

<!--[if !supportLists]-->-          <!--[endif]-->DTMF is ok (looks good on console)

<!--[if !supportLists]-->-          <!--[endif]-->PTT is ok

BUT there is no audio out from the URI on Port 22 and or 23 L

On a windows machine the URI works fine but on the asterisk there is no output

Any ideas ?

greetings

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.