or +2.2 dBm (referenced against 600 ohms).

For what it's worth, radio station consoles work normally (at least in all the plants I built or worked in...) at +4 dBm.  there is MORE than enough level and adjustability without having to pad, attenuate, or go through gyrations to get this to work. I've interfaced everything from aforesaid consoles to cheap chinese HTs to commercial iron thru URIs with nothing other than wire and connectors to mate the equipment.  

--
Bryan
Sent from my iPhone 5...small
keyboard, big fingers...please
forgive misspellings...



On Oct 30, 2013, at 14:47, Jon Rorke <jrorke@cogeco.ca> wrote:

I dont know why you would want a resistor divider on the VOL/SQ hi line. It should be ~ 1 V p-p with a signal with 1k tone modulated @ 3k dev.  This is the perfect level to drive the URI. If it seems its overdriving the URI then disable the RX boost (RXboost=0) in the USBradio.conf file. Then retune.

Jon VA3RQ
On 10/30/2013 1:31 PM, Doug Crompton wrote:
Robert,

  The other end goes to ground. It would form a divider from the hi end of the pot to ground. You would take the audio from the center of the resistors.  I do not have this radio so I have no idea what the resistor values would be or if you even need them but I can say you don't want to load that point down so you wouldn't want the total resistance to be too low. The upper resistor (closest to the pot) should be the larger value and the one to ground the lower.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 30 Oct 2013 12:45:01 -0400
From: N1XBM@amsat.org
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Resistor divider

I need help, I am using a Mastr II and a URI. I want to use the vol/sql hi for my discriminator audio. I was going to use a resistor divider to pad down the audio.
Has anyone ever done this? Could you explain it in more detail to me. I've read you take the two resistors and put them in series. I would tap my URI in the middle where those two resistors meet. I assume one end goes to vol/sql hi, but where does the far end go?
Thanks for your help
Apparare Scientior
Paratus Communicare
-N1XBM

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users