I went back right after reading your reply (several hours after my original post) and it in fact came up the way it should. But then 5 minutes
later it went back to saying I wasn't connected. I'm not sure what it means but I can say I've never seen it behave like this before.

On Sun, Jan 11, 2015 at 4:56 PM, <mike@midnighteng.com> wrote:



Not sure but....

I think you are only suffering from a delay of the update to the list.

Try waiting for a short while (up to 30min) and look again.
Others have said it takes that long sometimes but I have only witnessed
about 5-6min.

Guess it depends on how busy the server is.


...mike/kb8jnm

> -------- Original Message --------
> Subject: [App_rpt-users] Node Status not showing...
> From: Jah Rastafari <nuhtrue@gmail.com>
> Date: Sun, January 11, 2015 5:29 pm
> To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
>
>
> Forgive me if this has already been discussed and I missed it, but I just
> noticed recently that although I was connected to a number of other
> nodes/repeaters, the 'Node Status' selection on the Allstar site says I'm
> not connected to anything. My node(s) show up properly in the available
> node list and everything else is as it should be. The Web Transceiver works
> properly also and I haven't changed anything recently. Am I missing
> something?
>
> Bob/ KK6RQ<hr>_______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.