-------- Original Message --------
Subject: [App_rpt-users] Transmitting Tone Sequences COP 48 No longer
working
From: W2YMM <
w2ymm1@gmail.com>
Date: Wed, July 16, 2014 8:43 pm
To: app_rpt ALLSTAR <
App_rpt-users@ohnosec.org>
I had this feature setup a few months ago and everything seemed to work ok.
I tried it today and it is no longer working.
Where can I investigate the error log files to see what may have happened ?
I use it to page a Motorola portable radio using Quick Call Paging.
887=cop,48,!2688.0/1000,!1130.5/3000 ; Send two tone paging sequence
When I enter the code to transmit the signal, there is no tones produced.
I have tried it with different radios as well as via the iaxRpt program.
Thanks for any help
Bob W2YMM
Allstar 28183,29973
IRLP 4265
Echolink 1224
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.