Can you please be more specific what you mean by “ping pong” issue and sends a pulse through the network?   I am presently using half duplex here and have not experienced anything as you describe.  What radio are you using and how is it interfaced? 
When I unkey, the receiver keys up for 50ms sending a carrier through the network any time someone unkeys. 

This is a motorola Maxtrac setup as a remote base listening to a certain repeater which is setup for "TX PL on Input Only" through the radio club. The repeater is a tad bit slow on it's Transmit CTCSS turning off however, so it sends a bit through the network when the remote base unkeys. 

If that makes any sense....

On Mon, Aug 6, 2018 at 4:33 PM William Becks <wllmbecks@gmail.com> wrote:

Hi Skyler,

 

Can you please be more specific what you mean by “ping pong” issue and sends a pulse through the network?   I am presently using half duplex here and have not experienced anything as you describe.  What radio are you using and how is it interfaced? 

 

Bill, WA8WG

 

 

From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Skyler F
Sent: Monday, August 6, 2018 5:18 PM
To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org>
Subject: [App_rpt-users] Disable Receiver for X milliseconds after TX UNKEY

 

I am dealing with a system (half duplex), which sends a pulse through the network. I've had this question quite a bit, but never been able to word it right. Hope this is understandable. 

 

This "ping pong" issue only occurs after the transmitter is unkeyed.  There is no way to fix this in hardware ( don't need to complicate it by going into technical details on how the link is setup)

 

RXONDELAY WORKS, but it is sort of pointless because now the beginning of everybody's transmission gets cut off, and is physically does not need to be. 

 

We are really looking for 

 

TX UNKEYS ------>   Disable RX ------ > Wait 1/4 second ------> Enable RX

 

NOT 

RXONDELAY:

USER KEYS --->  DISABLE RX ------>  WAIT 1/4 Second -----> ENABLE RX

 

Is there any way to perform the function in mind? ( in either usbradio, or simpleusb). Has anybody here thought about this before?

 

Thank You,

Skyler KDØWHB

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


--
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com