You probably need to tighten up the squelch – with no signal present do

 radio tune rxsquelch

I usually set mine at 100 points above the strongest noise reading after several tries.

Of course, your radio has to be set for receive tone squelch …. And the hang time on the repeater needs to be longer than the tone squelch on your radio (my radios need about 0.8 seconds of carrier with no tone, in order to completely eliminate any sound).

Ken

KE2N

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of KI6PSP (Ed)
Sent: Monday, January 17, 2011 8:15 PM
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Half Duplex works fine, Kerchunks on Full Duplex......

Ok, That was dumb. I added the Duplex line in the rpt.conf file, and didn't think about a conflict with the usbradio.conf. Next question, now that it works, I have an annoying squelch tail, how do I eliminate that?

KI6PSP (Ed)