I believe multiple echolinks, assuming you have multiple public IP's need to be setup on different servers each port forwarded from a different public IP. You would need multiple routers since you cannot route the same (echolink) ports to different LAN addresses on the same router. Unlike Allstar you have no control over the ports. They are fixed.

Perhaps VPN would work in this situation but you would still need multiple servers. Echolink is NOT allstar but then we all know that. Thank God for Allstar!

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 29 Jul 2015 14:11:26 -0500
From: lorentedford@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Multiple Echolink Server side

Hi again its loren was curious on how to setup multiple echolink configurations with the rpt.conf and echolink.conf 

On the server side I can get as many ips as needed however my issue is how can i get these services to work together..

I have enough bandwidth and grunt power just need some advice on how to set it up properly.




_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.