So what is the status on a load for asterisk/Allstar? I’m not that Linux or asterisk literate so it would be difficult to do it myself.
 
Ideas?
 
Thanks
73
Jim W7RY
 
 
Sent: Wednesday, April 30, 2014 1:38 PM
Subject: [App_rpt-users] Beagle Blacks back in at Adafruit
 
They are back in stock again and this might be the last of the rev B models. Rev C comes out in early May and is expected to cost about $10 more with 4G eMMC.  You do not need a rev C for Allstar but after Rev B runs out that will be your only choice.
BeagleBone Black

Link: http://www.adafruit.com/products/1278

Get the 9.95 black case also and power supply if you don't have one.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.