I have found in many cases of script failure was due to Ethernet hardware not recognized by the default initial install. I keep a linksys usb300 around for installing and after all the CentOS patching, the main nic is usually detected and I can remove the USB nic.
Sent from my Verizon Wireless 4G LTE DROID
Angelo Glorioso <n5uxt@hotmail.com> wrote:
Hi Mike,
I found that I needed to run
a cd surface check each time to verify the cd was good. You may have the same
problem. Double check the cd. You may have to download and burn another
one.
73 de Angelo
----- Original Message -----
Sent: Sunday, March 02, 2014 8:55
AM
Subject: Re: [App_rpt-users] ACID install
-- download site not working all week
The site seems to be working fine for me. You might try downloading the
ISO and burning it again.
--
Regards,
Chris
Andrist, KC7WSU
I was helping a few folks with their install and all of them got
hung-up on the acid install when the script called for phase1
download.
I even changed my hard drive and tried it on my system...
Problem being I did not change the hard drive (really reinstalled
original drive) and wiped my install.
Can anyone verify what I'm seeing on three networks ? (download site
broke)
...mike/kb8jnm
_______________________________________________
App_rpt-users
mailing
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To
unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe or
edit options button"
You do not need a password to unsubscribe, you can do
it via email confirmation. If you have trouble unsubscribing, please send a
message to the list detailing the problem.