This morning I followed the advice given by several members on the list. I added in the nodes section of both system

40968 = radio@192.168.20.1/40963,NONE on the hub box

41488 = radio@192.168.20.1/41488,NONE on the repeater box

And I still get connection failed error messages

Some back ground on what I have

· Comcast internet

· The Comcast supplied modem/router is bridged for modem gateway only

· ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into

· Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured

·  NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured

· Both machines for the moment have ssh of 222 (default) set

· 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235

· 40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243

The repeater was working fine up until about a month ago when It quit connecting to any nodes.

This morning I reset my router and reconfigured anything – no change

This morning I reformatted my repeater box and reconfigured using the Allstar Portal – no change

When I attempt to connect my repeater to my hub, which is on the same LAN with the node settings added that are listed above I get this error message on the CLI

[Dec 28 08:37:53] WARNING[2500]: chan_iax2.c:4328 handle_call_token: Address 192          .168.20.243 failed CallToken hash inspection

[Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_token: Address 192          .168.20.243 failed CallToken hash inspection

[Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_token: Address 192          .168.20.243 failed CallToken hash inspection

K0PWO_Hub*CLI> [Dec 28 08:37:53] WARNING[2500]: chan_iax2.c:4328 handle_call_tok          en: Address 192.168.20.243 failed CallToken hash inspection

K0PWO_Hub*CLI> [Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_tok          en: Address 192.168.20.243 failed CallToken hash inspection

No such command '[Dec 28 08:37:53] WARNING[2500]: chan_iax2.c:4328 handle_call_t          oken: Address 192.168.20.243 failed CallToken hash inspection' (type 'help [Dec           28' for other possible commands)

No such command '[Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_t          oken: Address 192.168.20.243 failed CallToken hash inspection' (type 'help [Dec           28' for other possible commands)

K0PWO_Hub*CLI> [Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_tok          en: Address 192.168.20.243 failed CallToken hash inspection[Dec 28 08:37:53] WAR          NING[2500]: chan_iax2.c:4328 handle_call_token: Address 192.168.20.243 failed Ca          llToken hash inspection

K0PWO_Hub*CLI> [Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_tok          en: Address 192.168.20.243 failed CallToken hash inspection

No such command '[Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_t          oken: Address 192.168.20.243 failed CallToken hash inspection[Dec 28 08:37:53] W          ARNING[2500]: chan_iax2.c:4328 handle_call_token: Address 192.168.20.243 failed           CallToken hash inspection' (type 'help [Dec 28' for other possible commands)

No such command '[Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_t          oken: Address 192.168.20.243 failed CallToken hash inspection' (type 'help [Dec           28' for other possible commands)

K0PWO_Hub*CLI> [Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_tok          en: Address 192.168.20.243 failed CallToken hash inspectionexit

No such command '[Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_t          oken: Address 192.168.20.243 failed CallToken hash inspectionexit' (type 'help [          Dec 28' for other possible commands)

Once again, anybody have any ideas on what is wrong?

Thank you for any help provided.

David