At the least you have success. It takes about 10 minutes or less, when you first bootbefore your node reports to all the other on-line nodes. Some of my nodesuse a static IP and others DHCP with reserved address. Let us all know how thingswork out for you.Good luck RichardJKFrom: Richard Szajkowski <va3rzs@gmail.com>
To: Johnny Keeker <cypresstower@yahoo.com>
Sent: Thursday, October 10, 2013 7:02 PM
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
I now have what I think is a working system ,For some reason it fails if I put in a static IP , but if I run with DHCP it finds the mic and runsIf I tell it to pull down the info from the server for he node it diesI need it on a static IP for port fowarding , just like my other VoIP systemsAnd I did do the info on the web portal to the best I can, I entered in all the info it requestedI even got to install your device now , this will be here Tuesday because of our long weekendThanks for all the help
Richard Szajkowskidid you Not Create an installation disk????I thought you were past that point and sitting at the test promptIf you completed the ACID install and got the test promptthe password is 'setup'once your in root type passwd and change itnodesetup.sh will run the script to push your node config files from the allstar server toyour node "provided you created and saved the files prior to your ACID installation"JKFrom: "zeppelin.1@netzero.com" <zeppelin.1@netzero.com>
To: app_rpt-users@ohnosec.org
Sent: Thursday, October 10, 2013 5:20 PM
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
Hello Richard and welcome to the Linux world;
You "must" do a CD BURN to the ISO for it to work properly, low speed is best for older CD ROM.73 Anton/ KC2RQR
Node 29103
---------- Original Message ----------
From: app_rpt-users-request@ohnosec.org
To: app_rpt-users@ohnosec.org
Subject: App_rpt-users Digest, Vol 56, Issue 20
Date: Thu, 10 Oct 2013 12:00:01 -0400
Send App_rpt-users mailing list submissions to
app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request@ohnosec.org
You can reach the person managing the list at
app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Help with new install (Richard Szajkowski)
----------------------------------------------------------------------
Message: 1
Date: Wed, 9 Oct 2013 18:14:55 -0400
From: Richard Szajkowski <va3rzs@gmail.com>
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Help with new install
Message-ID: <B2A7C8C9-28C3-4A33-8F56-558F97D69D7D@gmail.com>
Content-Type: text/plain; charset=us-ascii
Hello to the group
I am trying to get the computer on line while my interface is shipped
I downloaded the ISO off the website , followed the prompts , I am not at a prompt
Test >
I did not enter a root password as I was not asked
I can't find a PDF or anything on 1st time installs
Any help would be great
Thanks
Richard Szajkowski va3rzs
------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 56, Issue 20
*********************************************____________________________________________________________
NetZero now offers 4G mobile broadband. Sign up now.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users