Simplex. (duplex=0) Talks directly to and listens to a repeater, but the repeater's TX PL goes away when no input. It gets a quick "glimpse" of it once in a while and causes a "bounceback". 100ms delay or less would cure that.

----- Original Message -----

From: mike@midnighteng.com

To: KJ6KO

Sent: Wednesday, August 28, 2013 8:44 AM

Subject: RE: [App_rpt-users] RXONDELAY not working?

I "think" that it's use is dependent on duplex mode ??

What duplex mode are you using in rpt.conf?

mike/kb8jnm

-------- Original Message --------
Subject: [App_rpt-users] RXONDELAY not working?
From: "KJ6KO" <kj6ko@innercite.com>
Date: Wed, August 28, 2013 11:15 am
To: <App_rpt-users@ohnosec.org>

simpleusb.conf

setting rxondelay=x to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay.

Anyone? Saw another identical post from 2011 and there was NO reply!

Thanks...

KJ6KO