Are you using the mixminus parameter?<br><br>On Sunday, September 13, 2015, Jesse Lloyd &lt;<a href="mailto:ve7lyd@gmail.com">ve7lyd@gmail.com</a>&gt; wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hello All,<div><br></div><div>I have a RF network built out that has various drop repeaters controlled via DTMF. We&#39;ve been having issues with one of our RF links, so we decided to use 2 RTCM&#39;s and an Allstar server to link the sites together via IP instead.</div><div><br></div><div>This worked great, however I&#39;m having difficulties getting DTMF to pass. On the network we use * and # to control the drop repeaters, so I changed the function characters to: funcchar = A endchar = D, since A and D aren&#39;t used on our network. The link is permanently connected so I just wrote a startup macro for node 80: startup_macro = A390DA40 which connects node 80 to 90 and puts 90 into control mode so DTMF passes.</div><div><br></div><div>The problem is DTMF doesn&#39;t pass the other direction.  I can&#39;t put startup_macro = A380DA40 into node 90&#39;s stanza, asterisk complains that the nodes are currently connected.</div><div><br></div><div>Any ideas how I can do this? Really there is only a handful of commands that need to propagate over the IP link, I read on one of the archived mailing list emails that you can write a COP for every command needed to propagate over the IP link, but I can&#39;t figure out how to do that.</div><div><br></div><div>Any help would be great,</div><div><br></div><div>Thx,</div><div><br></div><div>Jesse</div></div>
</blockquote><br><br>-- <br><div dir="ltr"><div><div dir="ltr"><div>--<br></div><div>Tim</div></div></div></div><br>