Yes. I’m using
...
power=5
height=1
gain=3
dir=0
server1=server1.echolink.org
server2=servers.echolink.org
server3=nawest.echolink.org
server4=backup.echolink.org
#includeifexists
custom/echolink.conf
It may only use the first three... don’t
know.
From: Skyler Fennell
[mailto:electricity440@gmail.com]
Sent: Wednesday, July 02, 2014
11:33 AM
To: Bob; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Error
1
Do I select the server on the echolink conf file?
I’ve had trouble with server2 for echolink.
Recommend deleting and select another from the list.
Bob
kk6ecm
I guess it didn't
remember the stuff from yesterday, this is all it had today
[Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init
40764
[Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init
40930
[Jul 2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
[Jul 2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
[Jul 2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
[Jul 2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
[Jul 2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
[Jul 2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
[Jul 2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
[Jul 2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
to the Echolink server server2.echolink.org
On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm@gmail.com> wrote:
For sure Asterisk is not happy. A shot... sounds like
the computer lost your URI/FOB USB address when it lost power. Need to reset
using lsusb to identify address and reset devstr=
parameters in the USB tune file. I’ve also had this problem when the network
settings are not correct, but would bet on the devstr perameters.
Bob
kk6ecm
I know it is
probably on the archive a lot of places, but I am experiencing Error 1
sometimes.
It is sometimes right
off the bat when I reboot the system, sometimes not. I had it before, and I
decided to reinstall from scratch.
Is there anything
i can do about this? The only thing I could think that may have led to this is
the power cord accidentally coming loose once when the computer was on.
Asteriscks died
with error code 1
Asteriscks died
with error code 1
Asteriscks died
with error code 1
ETC........................
--