You gave me the hint that I needed, I went to the usbradio.conf file and commented out ctcssfrom=dsp and it started back..

 

It is not a normal thing?

 

 

How are you detecting carrier ctcss – is it DSP?

Keith


On 4/7/13 9:23 PM, "Pierre Martel" <wlmailhtml:petem001@hotmail.com> wrote:

Thnaks David..
 
but now I am in deep shit
 
after rebooting the server I have this..
 
/usr/sbin/safe_asterisk: line 125:  2818 Segmentation fault      (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY} < /dev/${TTY}
Asterisk ended with exit status 139
Asterisk exited on signal 11.
Automatically restarting Asterisk.
mpg123: no process killed
Asterisk ended with exit status 1
Asterisk died with code 1.
 
HELP!!!
 
the repeater is down and cant do anything to fix this!!!
 

From: David KE6UPI <mailto:dshaw@ke6upi.com> 
Sent: Sunday, April 07, 2013 8:48 PM
To: Pierre Martel <mailto:petem001@hotmail.com> 
Cc: APP RPT <mailto:app_rpt-users@ohnosec.org> 
Subject: Re: [App_rpt-users] Finally!
 
Sorry,

Good Job Pierre

David


On Sun, Apr 7, 2013 at 3:32 PM, Pierre Martel <wlmailhtml:petem001@hotmail.com> wrote:

 
 

Hi all!
 
 
 
I finaly got my 2 node machine connected to my club repeater’s, Bye Bye  RC-210!
 
 
 
So my node’s 27821 (UHF desktrac for now), and 28739 (VHF msr2000  receiver and a moded maxtrax 300 as exiter + msr 2000 100 watt PA)  are  online. I did not had a test set when I did te setting, so my audio is not as  good as it should be. (waiting for a friend to have some time to come fix  this).
 
 
 
Is there a way to have 2 node’s with number’s that follow each other? I  dont want to clog the system with unused node number, so I ask before filling  for new node’s number ;-)
 
 
 
Now If I could understand macro’s and a few other thing all would be  fine!!
 
 
 
Thanks again to the coder’s , you have no idea how prood I am to made it  work. (And the guy’s at the club look at me as if I am a guru ;-)    )
 
 
 
Now I know that I am the first in Quebec to have fully controled app_rpt  repeater, no hardware controler just a good computer!
 
 
 
Pierre
 
Ve2PF
 
 
 
p.s. we use to have some noise in our audio on VHF now its as if we work  on a line not RF the ausio is so clean guy’s can’t beleive it..
 
 
 
 
 
 
 
 
 
 

_______________________________________________
App_rpt-users  mailing list
wlmailhtml:App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

---

_______________________________________________
App_rpt-users mailing list
wlmailhtml:App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

--
wlmailhtml:keith@goobie.org
Keith Goobie
Richmond Hill, ON, CANADA