I did a little research and checking on this. If you set the tone define to null like:

linkunkeyct=

you will get no tone but you wil get a keyup. If you set:

nounkeyct=1

you will get no tone and no keyup at carrier drop so this is the best way to do it.

nounkeyct=0  is the default on the BBB and the default if it is not defined.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Thu, 29 Jan 2015 10:02:41 -0600
From: asylthe@kc9ona.com
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Duplex / Telemetry / Courtesy Tone Question

Thank you to everyone that replied.  I believe I do have it figured out now.

Mike,  I hear what you're saying regarding the 0,0 tone.  My goal was to keep the radio from transmitting altogether.  I didn't test it, but I believe your suggestion would have transmitted a silent tone which isn't what I was trying to accomplish.

Steve, I commented out the 'idrecording=' configuration option under my node stanza, and that has effectively disabled the ID.  I didn't have to touch anything in the [telemetry] stanza.

So, right now my node is set to duplex=1, there is no ID, and I only hear a courtesy tone when a networked user unkeys.

Here are the pertinent configuration options I set under my node stanza to accomplish this:

duplex=1
;idrecording=|iKC9ONA/L
; Telemetry & Courtesy Tone Options
telemetry=telemetry
;unlinkedct=ct2 ; Sent when not connected to another node
;remotect=ct3   ; Sent when remote base connected
linkunkeyct=ct8 ; sent when a network user unkeys
nolocallinkct=1
eannmode=2
echolinkdefault=0
echolinkdynamic=0
nounkeyct=1
holdofftelem=1
telemdefault=0
telemdynamic=0
guilinkdefault=0
guilinkdynamic=0
phonelinkdefault=0
phonelinkdynamic=0


Thanks!

On Wed, Jan 28, 2015 at 1:27 PM, Andrew Sylthe <asylthe@kc9ona.com> wrote:
Hello All,

I'm struggling to configure my simplex node in a particular way.  As of right now I have duplex=0 specified for my node in rpt.conf.  My goal is to maintain the functionality of duplex=0, but do want a courtesy tone to transmit ONLY when a remotely connected AllStar node unkeys.  I do not want the simplex node to ID or transmit a courtesy tone for local transmissions.  Has anyone else configured their node in such a way?  If so, would you be willing to share your configuration.

I've tried setting duplex=1 in rpt.conf along with the following settings with no luck:

; Telemetry & Courtesy Tone Options
telemetry=telemetry
;unlinkedct=ct2 ; Sent when not connected to another node
remotect=ct3   ; Sent when remote base connected
linkunkeyct=ct8 ; sent when a network user unkeys
nolocallinkct=1
eannmode=2
echolinkdefault=0
echolinkdynamic=0
nounkeyct=0
holdofftelem=1
telemdefault=0
telemdynamic=0
guilinkdefault=0
guilinkdynamic=0
phonelinkdefault=0
phonelinkdynamic=0


Thank you in advance for anyone that is able to help!

--
Andrew Sylthe
KC9ONA



--
Andrew Sylthe
KC9ONA

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.