Yes,
I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more.
I't not hard to get lists confused.

Steve

On 7/11/2016 1:30 PM, DuaneVT . wrote:

Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list.  

Here is an example. I felt for the questioner...

"Message: 3

Date: Sun, 10 Jul 2016 09:53:39 -0400
From: Doug Crompton <doug@crompton.com>
To: ARM Allstar <arm-allstar@hamvoip.org>
Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the
        DIAL Image on a RPi
Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

Ramesh,

 This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> To: arm-allstar@hamvoip.org
> Date: Sun, 10 Jul 2016 07:34:57 -0400
> Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image   on a RPi
> From: arm-allstar@hamvoip.org
> CC: Ramesh@va3uv.com
>
> Hi All:
>
> I am using the DIAL Image on a PRi 2; I would like to use the "A" and
> "B" audio outputs from my fob (A for voice and B for PL), so that I can
> inject them into separate points on my exciter.
>
> I was able to get 2 'discrete' audio outputs when running ACID on a PC.
> This doesn't seem to be working with the Pi / DIAL.  Is anyone running
> this configuration on a Pi?
>
> Thx,
>
> Ramesh.
>
> # 27919 and a truck load of others!

​"

Sheesh, I want to help everyone....

Thanks again until my next question HERE,

Duane ​

On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com> wrote:

Duane,
When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.

73, Steve N4IRS
INAD

On 7/11/2016 12:42 PM, DuaneVT . wrote:

I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets.........

Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out.

I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do.

73,

Duane  KA1LM  #42996

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.