They work quite well in my environment.  There are a few caveats, best practices and things to know before you get started.  These are things you'll learn here either by asking or finding the info in the archives.  

BTW thanks to all who helped me refine my system.  It votes flawlessly!  

On Mon, May 18, 2015 at 8:05 PM, Mark Johnston <markjohnston73@gmail.com> wrote:
I tried 3 of them - less then stable devices - sometimes would lock up - even when restarting them -
Maybe you will have better luck - 
Yes you need one 'near' the server/asterisk box for a local timing source using GPS - must be on the same local network very low latency.



"Got Root?"

How many software engineers does it take to change a light bulb?
None. It's a hardware problem.


Unix is user friendly. It's just very particular about who it's friends are.
WINDOWS: Will Install Needless Data On Whole System
MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.


A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."


On Mon, May 18, 2015 at 6:56 PM, Robert Newberry <N1XBM@amsat.org> wrote:

I have a mild interest in voting. Seems like the RTCM are the way to go. Can anyone give me a brief over view?

What I specifically want to know if my main site where the transmitter resides currently runs on a Acid box, do I need to run a RTCM there as well? Or do I only need them at my RX sites.

Thank you

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812
   


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.