hi skyler
look at this site he has a lot of very useful script for allstar. take a good look at the " astflip " script.
it will do what you need. it will allow you to change to completely different copy of rpt.conf.
you set a rpt.normal file and a rpt.fipped file then what the script will do is replace your rpt.conf with
the normal file or the flipped file upon demand via a dtmf command.
it use this script to do exactly what you are trying to do twice a week to feed a repeater system a skywarn net.
And when i do that the script change the running config of allstar for the net and turns off all courtesy tones
and other stuff.
ken n1dot
On 7/28/2014 1:12 PM, Skyler F wrote:
I have a link to a remote repeater using the input frequency.
We finally figured out how to execute a command when the last link disconnects but not when 1 link is still connected while the other disconnects.
In the connect and disconnect script files, we have the DTMF dialing.
Is there a command I can use to completely disable the ID without disabling any other telemetry or changing anything else so I can put that in the script files?
The node ONLY needs to ID when it is transmitting, and the ONLY time it transmits is when it is connected to a link.
you might say "hey, what if you are only connected for 8 mins, not 10 and it does not ID" , well I will have it ID on disconnect.
Thanks, this is the last problem we have to fix, and if not, our only other choice is to let the ID loop play every 10 mins.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.