On 9/26/18 1:12 AM, Monty wrote:
> Hello Everyone,
>
> Does anyone have complete steps to load a Quad PCI card in from a freshly
> installed DIAL on the current ISO?  I'm migrating from ACID to DIAL.
>
> Here's what I have so far:
>
>    1. modprobe pciradio
>    2. Converted zaptel.conf to /etc/dahdi/system.conf
>    3. Copied zapata.conf from ACID machine to DIAL.
>    4. dahdi_cfg -vv
>    5. Copied rpt.conf and updated rxchannel= from zap/ to dahdi/
>    6. Copied extensions.conf and iax.conf from ACID.
>
> Anything I'm missing?

Looks good, but zapata.conf will be dahdi.conf.  What

I use this for rxchannel:
rxchannel = DAHDI/1

What errors do you get?
--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.