Hello Erich, You just need to forward the port 4569 UDP (like you stated) to your RasPi.  Maybe this link might help. https://portforward.com/asus/rt-ac68p/

To answer your question.

[root@2063 ~]# cat /var/lib/asterisk/rpt_extnodes |grep 43966
43966=radio@74.192.142.22:4569/43966,74.192.142.22

Yes your node is registered.

David



--
Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson

On Mon, May 1, 2017 at 12:34 PM, Erich Ellsworth <kg5key@yahoo.com> wrote:
Greetings,

I am currently using a Cisco 7960 connected to my Raspberry Pi 3 to mess around with AllStarLink. (Node 43966)
Currently, I am able to connect to other nodes perfectly, however I am unable to receive connections from other nodes.

According to this troubleshooting guide, the issue could be the following...

1.) Port 4569 UDP is not set up to be forwarded to the correct internal address. 
2.) My router requires that the port setting to be forced to port 4569 on the registration server.

I believe that #1 is ruled out because I have double checked that the internal address is correct. (My router is a Asus RT-AC68P)

Could a system administrator double check that my node is registering properly?

Thanks,
Erich KG5KEY

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.