The node is at a wireless internet provider hub.  I have 1.5 Mb of speed at all times. This has started to happen after I installed the keep connected commands. The node has always had this issue though.
 
73
Jim W7RY
 
 
Sent: Tuesday, September 04, 2012 8:20 PM
Subject: RE: [App_rpt-users] What is wrong with my node?
 

This is usually an ISP issue.  Happens to me all the time with my crummy cable ISP.  Usually have to restart the cable modem and router to get it playing nice again.  DMZ or not, your router or the remote router could be blocking traffic.  I’ve seen it a 100 times here though your issue could be different, my two cents.

 

 

73 de K0JSC

 

 

From: Jim W7RY [mailto:w7ry@centurytel.net]
Sent: Tuesday, September 04, 2012 9:01 PM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] What is wrong with my node?

 

Why is this happening? See below.....   The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working.

 

This node not being able to re-connect or connect is really not cool!

 

What is going on here?

 

 

Thanks!

Jim W7RY

 

 

 

2560 on IAX2/208.70.77.197:4569-13708

[Sep  4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At                                              tempt to 2560 in process

[Sep  4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting                                               call due to slow response

    -- Hungup 'IAX2/208.70.77.197:4569-13708'

    -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/                                              2560 on IAX2/208.70.77.197:4569-14388

[Sep  4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At                                              tempt to 2560 in process

[Sep  4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting                                               call due to slow response

    -- Hungup 'IAX2/208.70.77.197:4569-14388'

    -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647

[Sep  4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process

[Sep  4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response

    -- Hungup 'IAX2/208.70.77.197:4569-15647'

    -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971

[Sep  4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process

[Sep  4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response

    -- Hungup 'IAX2/208.70.77.197:4569-6971'

    -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440

[Sep  4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process

[Sep  4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response

    -- Hungup 'IAX2/208.70.77.197:4569-13440'

w7ry*CLI> exit