Still having troubles getting allmon to work. Visiting kd0whb.duckdns.org/allmon still gets stuck on "waiting".

Below is the allmon.ini.php

<?php
[About]
url=about.php
[40764]
host=kd0whb.duckdns.org:5038
user=admin   
passwd=<my password>
menu=yes

[Some other thing]
url=someotherthing.php
?>


[general]                                                                       
displaysystemname = yes                                                         
enabled = yes                                                                   
webenabled = yes                                                               
port = 5038                                                                     
                                                                                
;httptimeout = 60                                                               
; a) httptimeout sets the Max-Age of the http cookie                            
; b) httptimeout is the amount of time the webserver waits                      
;    on a action=waitevent request (actually its httptimeout-10)                
; c) httptimeout is also the amount of time the webserver keeps                 
;    a http session alive after completing a successful action                  
                                                                                
bindaddr = 0.0.0.0                                                              
;displayconnects = yes                                                          
;                                                                               
; Add a Unix epoch timestamp to events (not action responses)                   
;                                                                               
;timestampevents = yes                                                          
                                                                                
[admin]                                                                         
secret = <my password>                                                             
read = all,system,call,log,verbose,command,agent,user,config                    
write = all,system,call,log,verbose,command,agent,user,config                   

The passwords are the same in allmon ini and manager.conf.

Any suggestions?

Thanks,
Skyler



On Nov 16, 2014, at 5:28 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:

Yes you have to edit your manager.conf 

; Choose one
bindaddr = 0.0.0.0   ; wide open - your Allmon server at any IP. 
;bindaddr = 127.0.0.1 ; if Allmon web server is running on localhost. 
;bindaddr = 10.10.10.10 ; Or your web server IP.
                                                                            
; Allmon user ID is admin or whatever you want to make [yourID]. must match allmon.ini.php    
[admin]                                                                         
secret = y0urSecr3t3-Passw0rd_W1thNumbe3rsAndStu44 ; must match allmon.ini.php
  
--
Tim
:wq

On Nov 16, 2014, at 3:36 PM, Skyler F <electricity440@gmail.com> wrote:


On Sun, Nov 16, 2014 at 4:36 PM, Skyler F <electricity440@gmail.com> wrote:
I forwarded the port 5038, and ran everything from the readme, but it still says "waiting" under node information, and will not connect. 

See here: 


On the Readme, there was also a line that said to "Edit /etc/asterisk/manager.conf", but nothing after that, is there something that I should do in manager.conf?

73
Skyler KDØWHB



On Thu, Nov 13, 2014 at 10:14 AM, Tim Sawyer <tim.sawyer@mac.com> wrote:
ARRG… auto correct. That filename should be allmon.ini.php
--
Tim
:wq

On Nov 13, 2014, at 9:13 AM, Tim Sawyer <tim.sawyer@mac.com> wrote:

Allmon 2 changed the ini filename to almond.ini.php
--
Tim
:wq

On Nov 13, 2014, at 7:56 AM, Skyler F <electricity440@gmail.com> wrote:

Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt to allmon.ini. It still says "could not load allmon.ini" though, unlike with allmon 1.

Do I need to forward port 5038 to work? And where it says to use "yourhost.com", I have a dynamic dns server kd0whb.duckdns.org, is that what I should use? Is the username root and password the password to login to the node?

Skyler KDØWHB

On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe@repeater.net> wrote:
I second this...  I have wanted to see this work for some time now but as stated it only does the commands and doesn't show the connected nodes.  I really wish it did as I use the xipar voting and that would be great to see on allmon or something similar...

Corey N3FE

On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve@m0hoy.com> wrote:

I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!

Thanks
Steve 
M0HOY




On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer@mac.com> wrote:

I think it will work with Xipar as it’s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
--
Tim
:wq

On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl@att.net> wrote:

Tim
Will this work with xipar nodes?

Lu Vencl

On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:

Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2
--
Tim
:wq

On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear@kb2ear.net> wrote:

So where is allmon v2 being hosted?

Thanks & 73,
Scott KB2EAR

On 2014-11-12 09:25, Tim Sawyer wrote:

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



--
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.





--



--