I don't think that ever got implemented in hardware... there's no DAC there.On Sat, Jan 7, 2017 at 12:39 PM, Skyler F <electricity440@gmail.com> wrote:______________________________Unfortunately, on our CTCSS output, there is about 0.15 Volts when no signal, and 5 when there is signal. The RTCM thinks that there is Always a signal.I am trying to adjust this menu on the RTCM:20 - Ext. CTCSS Input Threshold (850) (0-1023)
When I hit 20, and then enter my new value, it is not updated, and stays at 850, this number is set and won't change.
Any thoughts? If this doesen't work, we will probably try to use a diode or something to drop the voltage.
Skyler K0WHB
_________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.----Tim