I think he means how to actually edit rpt.conf, etc("settings")...I think... He may be only doing this via the web site(??) GeorgeC W2DB 2360

Date: Sat, 14 May 2011 22:54:36 -0700 From: Jim Duuuude <telesistant@hotmail.com> To: <k8khw@att.net>, app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Access Message-ID: <BLU155-w56E71CAC676F655BFCF9EAB18A0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"

The reverse autopatch via the Allstar Telephone Portal is something that is provided via the Allstar Network system infrastructure and, for the most part, is implemented in the Allstar Portal system. The node plays very little role in the process, other then responding to requests from the Portal system. Therefore, the control for access of this service is exclusively implemented within the Allstar Portal.

If you wish to "roll your own" reverse autopatch, that's a whole other issue entirely.

JIM WB6NIL

From: k8khw@att.net To: app_rpt-users@ohnosec.org Date: Sat, 14 May 2011 22:57:41 -0400 Subject: Re: [App_rpt-users] Access

Not sure how else to decribe it. Acess settings like for the Reverse autopatch Telephone Portal , Web Transciever Looking for the way to change them by not using the web based method.

Randy

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users