Hi Frank, It is not Pin to Pin, as Pin 1 of the RTCM needs 12 volt. But you can make an adapter. As far as I know, there isn't any device that will connect pin to pin. Monty On Thu, Sep 27, 2012 at 6:10 PM, Fran <baldwin88@yahoo.com> wrote:

Hello,

I have a Majorie repeater and a RTCM and want to know if its possible to connect the repeater DB9 direct to the RTCM DB9 ???

Frank

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users