"links to the repeater only via the repeater input/output"... so no. Mike WM4B On Wed, May 16, 2018 at 1:40 PM, Mike wrote:

Can you change the freq of operation of the radio attached by command 'within/though" this node # ?

...is the answer to your question. location does not matter.

...mike/kb8jnm

On 5/16/2018 12:54 PM, mwbesemer@cox.net wrote:

...

If a node is established at a location different from that of the repeater and links to the repeater only via the repeater input/output, would it be considered a non-frequency agile remote-base?

Mike WM4B _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.