Re: [App_rpt-users] Asterisk Bombs after startup.
OK, I've found something else that might help diagnose the issue? I ran asterisk -cvvvv and got the following at the end before it bombs. "Segmentation fault" Could it be there is a corrupt file or something? Funny thing is everything works fine for about the first 10-20 seconds. The last thing it tries is some radio tune file. Maybe I should try downloading and recompiling the APP_RPT & USB_Radio modules? Any idea's? ~Ken~ vk4akp .-.-. [Oct 11 00:44:50] NOTICE[28167]: app_rpt.c:19094 rpt_master: Normal Repeater Init 2134 -- Loading initial config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- Re-Loading config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-2 to usb ERROR: numrxcodes != numtxcodes [Oct 11 00:44:50] NOTICE[28167]: app_rpt.c:19094 rpt_master: Normal Repeater Init 20040 -- Re-Loading config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1 == Parsing '/etc/asterisk/usbradio_tune_usb.conf': Found [Oct 11 00:44:50] WARNING[28171]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . == Set device 1-1 to usb1 == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found [Oct 11 00:44:50] WARNING[28173]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . -- Hungup 'Zap/pseudo-327798110' Segmentation fault -- On 10/7/2011 2:00 AM, app_rpt-users-request@ohnosec.org wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: App_rpt-users Digest, Vol 32, Issue 6 (Ken Page) 2. Re: for those Limey Linux and or D525MW users who are brave enough (Ramesh Dhami (VA3UV)) 3. Re: for those Limey Linux and or D525MW users who are brave enough (Jim Duuuude) 4. Re: for those Limey Linux and or D525MW users who are brave enough (Ramesh Dhami (VA3UV))
----------------------------------------------------------------------
Message: 1 Date: Fri, 07 Oct 2011 01:50:38 +1000 From: Ken Page<vk4akp@yahoo.com.au> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 32, Issue 6 Message-ID:<4E8DCE4E.7020900@yahoo.com.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi Mr Duuuude,
Well. I am able to access the PBX via the phone that is plugged into the TDM card and jump on the meetme conference.
I can also bridge in another caller into the conference and talk for about 10 seconds before Asterisk stops / falls over.
The last thing in the log that Asterisk seems to try to do before it crashes is read the radio tune stuff.
The two URI interfaces do flash as per normal for a while before it all crashes.
If I just try rebooting the machine but not accessing Asterisk at all via phone or anything it still falls over soon after boot.
Weird.
Am I right in guessing that because I can access meetme conference and also the TDM card that the zaptel drivers are loaded OK?
~Ken - vk4akp~ .-.-.
On 10/7/2011 1:30 AM, app_rpt-users-request@ohnosec.org wrote:
Message: 3 Date: Thu, 6 Oct 2011 08:30:55 -0700 From: Jim Duuuude<telesistant@hotmail.com> To:<vk4akp@yahoo.com.au>, app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Asterisk service stopping minutes after boot constantly.. Help? Message-ID:<BLU155-W223FE76CA98B46CFDF40CEB1F90@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
looks to me like maybe Zaptel isnt running
JIM
Date: Fri, 7 Oct 2011 01:29:32 +1000 From:vk4akp@yahoo.com.au To:app_rpt-users@ohnosec.org Subject: [App_rpt-users] Asterisk service stopping minutes after boot constantly.. Help?
Hi,
Last few days I have had a problem with Asterisk stopping for no reason.
Asterisk service stops a couple of minutes after boot for no reason.
Every time I reboot or restart Asterisk I get the same thing. Asterisk runs for a couple of minutes and then drops out.
Nothing has been changed on the system in weeks.
Any idea's?
Tail of the log is included below.
~Ken - vk4akp~ .-.-.
[Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: Starting AEL load process. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: parsed config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: checked config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: compiled config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: merged config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: verified config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] ERROR[7624] codec_dahdi.c: Failed to open /dev/zap/transcode: No such file or directory [Oct 7 00:29:41] NOTICE[7624] chan_irlp.c: Unable to load config irlp.conf [Oct 7 00:29:42] NOTICE[7624] app_gps.c: Unable to load config gps.conf [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 2134 [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 20040 [Oct 7 00:29:42] WARNING[7668] chan_usbradio.c: Loaded parameters from usbradio_tune_usb.conf for device usb . [Oct 7 00:29:42] WARNING[7672] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1.conf for device usb1 .
--
------------------------------
Message: 2 Date: Thu, 06 Oct 2011 11:54:11 -0400 From: "Ramesh Dhami (VA3UV)"<Ramesh@va3uv.com> To: app_rpt mailing list<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough Message-ID:<4E8DCF23.7050506@va3uv.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
On 06/10/2011 10:38 AM, Jim Duuuude wrote:
Thin clients?? What do you think we are, and eating disorder clinic or something ?? :-) :-)
First of all, Limey only supports VERY specific motherboard, of which that is not one. Also, since it runs entirely out of RAM, you need more then that for it to work in a reasonable manner.
<-- OK Jim; So I will save myself from those Limey's!
Thin is good ... thin makes my hydro meter spin slowly. These things run of 13.8V @ ~ 600mA. Me likes that :).
Cheers!
Ramesh.
p.s., for all those than inquired last week - the ISO and install scripts for my FREE STAR* project are now on my site:
The install script will even allow you to install on top of an ACID build - how's that for playing nice!
------------------------------
Message: 3 Date: Thu, 6 Oct 2011 08:55:38 -0700 From: Jim Duuuude<telesistant@hotmail.com> To: Ramesh Dhami<ramesh@va3uv.com>, app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough Message-ID:<BLU155-W16D3D603597EDFF11F559EB1F90@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Why dont you try a Beagleboard and LOX board.. It runs at 1/4 of that power!
JIM
Date: Thu, 6 Oct 2011 11:54:11 -0400 From: Ramesh@va3uv.com To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough
On 06/10/2011 10:38 AM, Jim Duuuude wrote:
Thin clients?? What do you think we are, and eating disorder clinic or something ?? :-) :-)
First of all, Limey only supports VERY specific motherboard, of which that is not one. Also, since it runs entirely out of RAM, you need more then that for it to work in a reasonable manner.
<-- OK Jim; So I will save myself from those Limey's!
Thin is good ... thin makes my hydro meter spin slowly. These things run of 13.8V @ ~ 600mA. Me likes that :).
Cheers!
Ramesh.
p.s., for all those than inquired last week - the ISO and install scripts for my FREE STAR* project are now on my site:
The install script will even allow you to install on top of an ACID build - how's that for playing nice! _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Hi Ken, Check /etc/asterisk/usbradio.conf and look to see that your number count of CTCSS decode and encode tones match. That is what the error message is saying: ERROR: numrxcodes != numtxcodes Tony --- On Mon, 10/10/11, Ken Page <vk4akp@yahoo.com.au> wrote:
From: Ken Page <vk4akp@yahoo.com.au> Subject: Re: [App_rpt-users] Asterisk Bombs after startup. To: app_rpt-users@ohnosec.org Date: Monday, October 10, 2011, 10:32 AM OK, I've found something else that might help diagnose the issue?
I ran asterisk -cvvvv and got the following at the end before it bombs.
"Segmentation fault"
Could it be there is a corrupt file or something?
Funny thing is everything works fine for about the first 10-20 seconds.
The last thing it tries is some radio tune file.
Maybe I should try downloading and recompiling the APP_RPT & USB_Radio modules?
Any idea's?
~Ken~ vk4akp .-.-.
[Oct 11 00:44:50] NOTICE[28167]: app_rpt.c:19094 rpt_master: Normal Repeater Init 2134 -- Loading initial config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- Re-Loading config for repeater 2134 == Parsing '/etc/asterisk/rpt.conf': Found ERROR: numrxcodes != numtxcodes -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-2 to usb ERROR: numrxcodes != numtxcodes [Oct 11 00:44:50] NOTICE[28167]: app_rpt.c:19094 rpt_master: Normal Repeater Init 20040 -- Re-Loading config for repeater 20040 == Parsing '/etc/asterisk/rpt.conf': Found -- rpt (Rx) initiating call to Radio/usb1 on Radio/usb1 == Parsing '/etc/asterisk/usbradio_tune_usb.conf': Found [Oct 11 00:44:50] WARNING[28171]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb.conf for device usb . == Set device 1-1 to usb1 == Parsing '/etc/asterisk/usbradio_tune_usb1.conf': Found [Oct 11 00:44:50] WARNING[28173]: chan_usbradio.c:1449 hidthread: Loaded parameters from usbradio_tune_usb1.conf for device usb1 . -- Hungup 'Zap/pseudo-327798110' Segmentation fault
--
On 10/7/2011 2:00 AM, app_rpt-users-request@ohnosec.org wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: App_rpt-users Digest, Vol 32, Issue 6 (Ken Page) 2. Re: for those Limey Linux and or D525MW users who are brave enough (Ramesh Dhami (VA3UV)) 3. Re: for those Limey Linux and or D525MW users who are brave enough (Jim Duuuude) 4. Re: for those Limey Linux and or D525MW users who are brave enough (Ramesh Dhami (VA3UV))
----------------------------------------------------------------------
Message: 1 Date: Fri, 07 Oct 2011 01:50:38 +1000 From: Ken Page<vk4akp@yahoo.com.au> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol
Message-ID:<4E8DCE4E.7020900@yahoo.com.au> Content-Type: text/plain; charset=ISO-8859-1;
32, Issue 6 format=flowed
Hi Mr Duuuude,
Well. I am able to access the PBX via the phone that
TDM card and jump on the meetme conference.
I can also bridge in another caller into the conference and talk for about 10 seconds before Asterisk stops / falls over.
The last thing in the log that Asterisk seems to try to do before it crashes is read the radio tune stuff.
The two URI interfaces do flash as per normal for a while before it all crashes.
If I just try rebooting the machine but not accessing Asterisk at all via phone or anything it still falls over soon after boot.
Weird.
Am I right in guessing that because I can access meetme conference and also the TDM card that the zaptel drivers are loaded OK?
~Ken - vk4akp~ .-.-.
On 10/7/2011 1:30 AM, app_rpt-users-request@ohnosec.org wrote:
Message: 3 Date: Thu, 6 Oct 2011 08:30:55 -0700 From: Jim Duuuude<telesistant@hotmail.com> To:<vk4akp@yahoo.com.au>, app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Asterisk service stopping minutes after boot constantly.. Help? Message-ID:<BLU155-W223FE76CA98B46CFDF40CEB1F90@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
looks to me like maybe Zaptel isnt running
JIM
Date: Fri, 7 Oct 2011 01:29:32 +1000 From:vk4akp@yahoo.com.au To:app_rpt-users@ohnosec.org Subject: [App_rpt-users] Asterisk service stopping minutes after boot constantly.. Help?
Hi,
Last few days I have had a problem with Asterisk stopping for no reason.
Asterisk service stops a couple of minutes after boot for no reason.
Every time I reboot or restart Asterisk I get the same thing. Asterisk runs for a couple of minutes and then drops out.
Nothing has been changed on the system in weeks.
Any idea's?
Tail of the log is included below.
~Ken - vk4akp~ .-.-.
[Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: Starting AEL load process. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: parsed config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: checked config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: compiled config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: merged config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: verified config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] ERROR[7624] codec_dahdi.c: Failed to open /dev/zap/transcode: No such file or directory [Oct 7 00:29:41] NOTICE[7624] chan_irlp.c: Unable to load config irlp.conf [Oct 7 00:29:42] NOTICE[7624] app_gps.c: Unable to load config gps.conf [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 2134 [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 20040 [Oct 7 00:29:42] WARNING[7668] chan_usbradio.c: Loaded parameters from usbradio_tune_usb.conf for device usb . [Oct 7 00:29:42] WARNING[7672] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1.conf for device usb1 .
--
------------------------------
Message: 2 Date: Thu, 06 Oct 2011 11:54:11 -0400 From: "Ramesh Dhami (VA3UV)"<Ramesh@va3uv.com> To: app_rpt mailing list<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough Message-ID:<4E8DCF23.7050506@va3uv.com> Content-Type: text/plain; charset=ISO-8859-1;
is plugged into the format=flowed
On 06/10/2011 10:38 AM, Jim Duuuude wrote:
Thin clients?? What do you think we are, and
something ?? :-) :-)
First of all, Limey only supports VERY specific motherboard, of which that is not one. Also, since it runs entirely out of RAM, you need more then that for it to work in a reasonable manner.
<-- OK Jim; So I will save myself from those Limey's!
Thin is good ... thin makes my hydro meter spin slowly. These things run of 13.8V @ ~ 600mA. Me likes that :).
Cheers!
Ramesh.
p.s., for all those than inquired last week - the ISO and install scripts for my FREE STAR* project are now on my site:
The install script will even allow you to install on top of an ACID build - how's that for playing nice!
------------------------------
Message: 3 Date: Thu, 6 Oct 2011 08:55:38 -0700 From: Jim Duuuude<telesistant@hotmail.com> To: Ramesh Dhami<ramesh@va3uv.com>, app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough Message-ID:<BLU155-W16D3D603597EDFF11F559EB1F90@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Why dont you try a Beagleboard and LOX board.. It runs at 1/4 of that power!
JIM
Date: Thu, 6 Oct 2011 11:54:11 -0400 From: Ramesh@va3uv.com To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough
On 06/10/2011 10:38 AM, Jim Duuuude wrote:
Thin clients?? What do you think we are, and eating disorder clinic or something ?? :-) :-)
First of all, Limey only supports VERY specific motherboard, of which that is not one. Also, since it runs entirely out of RAM, you need more then that for it to work in a reasonable manner.
<-- OK Jim; So I will save myself from
eating disorder clinic or those Limey's!
Thin is good ... thin makes my hydro meter spin
slowly. These things
run of 13.8V @ ~ 600mA. Me likes that :).
Cheers!
Ramesh.
p.s., for all those than inquired last week - the ISO and install scripts for my FREE STAR* project are now on my site:
The install script will even allow you to install on top of an ACID build - how's that for playing nice! _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Ken Page -
Tony KT9AC