On 2/9/15, 12:06 AM, mike@midnighteng.com wrote:

Bryan,

Not Defined? I would put a definition in there as it is probably using a default since nothing has been defined.(guessing from what you said). I have never not defined them to know for sure.

Just copy the [telemetry] section from one of your other nodes and use it.

I'm using a common [telemetry] section. I've grep'd out the comments in my rpt.conf below. I'm stumped :)

root@asterisk:/etc/asterisk# grep "^[^#;]" rpt.conf [40821] ; Change this to your assigned node number rxchannel = Voter/1234 ; Rx audio/signalling channel erxgain=-9 ; Echolink receive gain adjustment etxgain=-3 ; Echolink transmit gain adjustment functions=functions ; Repeater Function Table phone_functions=functions ; Repeater Function Table link_functions=functions ; Link Function Table telemetry=telemetry ; Telemetry descriptions wait_times=wait-times ; Wait times macro=macro startup_macro=*95329094 context = radio ; dialing context for phone callerid = "Repeater" <0000000000> ; callerid for phone calls idrecording = |iW9CR ; id recording or morse string accountcode=RADIO ; account code (optional) hangtime=3000 ; squelch tail hang time (in ms) (optional) althangtime=6000 ; longer squelch tail totime=180000 ; transmit time-out time (in ms) (optional) idtime=540000 ; id interval time (in ms) (optional) politeid=30000 ; time in milliseconds before ID timer idtalkover=none ; Talkover ID (optional) default is none unlinkedct=ct4 ; unlinked courtesy tone (optional) default is none remotect=ct3 ; remote linked courtesy tone (indicates a remote is in the list of links) linkunkeyct=ct8 ; sent when a transmission received over the link unkeys nolocallinkct=0 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC). eannmode=2 ; Default: 1 = Say only node number on echolink connects beaconing=1 ; Send ID regardless of repeater activity (Required in the UK, but probably illegal in the US) statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates [902] rxchannel = Zap/1 ; Rx audio/signalling channel erxgain=-9 ; Echolink receive gain adjustment etxgain=-3 ; Echolink transmit gain adjustment duplex=2 functions=functions ; Repeater Function Table phone_functions=functions ; Repeater Function Table link_functions=functions ; Link Function Table telemetry=telemetry ; Telemetry descriptions wait_times=wait-times ; Wait times macro=macro context = radio ; dialing context for phone callerid = "Repeater" <0000000000> ; callerid for phone calls idrecording = |iW9CR ; id recording or morse string accountcode=RADIO ; account code (optional) hangtime=3000 ; squelch tail hang time (in ms) (optional) althangtime=6000 ; longer squelch tail totime=180000 ; transmit time-out time (in ms) (optional) idtime=540000 ; id interval time (in ms) (optional) politeid=30000 ; time in milliseconds before ID timer idtalkover=none ; Talkover ID (optional) default is none unlinkedct=ct4 ; unlinked courtesy tone (optional) default is none remotect=ct3 ; remote linked courtesy tone (indicates a remote is in the list of links) linkunkeyct=ct8 ; sent when a transmission received over the link unkeys nolocallinkct=1 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC). eannmode=2 ; Default: 1 = Say only node number on echolink connects beaconing=1 ; Send ID regardless of repeater activity (Required in the UK, but probably illegal in the US) statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates [functions] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 5=macro,1 70=ilink,5 71=ilink,6 ; disconnect all links 72=ilink,7 ; Last Node to Key Up 73=ilink,15 74=ilink,16 75=ilink,8 80=status,1 81=status,2 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down 989=cop,4 980=status,3 99=cop,6 951=ilink,11 ; Permanent link disconnect 952=ilink,12 ; Permanent link receive 953=ilink,13 ; Permanent link transceive [telemetry] ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ct2=|t(660,880,150,2048) ct3=|t(440,0,150,4096) ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ct8=|t(700,1100,150,2048) remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000); remotemon=|t(1209,0,50,2048) cmdmode=|t(900,903,200,2048) functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) patchup=rpt/callproceeding patchdown=rpt/callterminated eannmode=2 ; announce callsign only [morse] speed=20 ; Approximate speed in WPM frequency=300 ; Morse Telemetry Frequency amplitude=4096 ; Morse Telemetry Amplitude idfrequency=660 ; Morse ID Frequency idamplitude=1024 ; Morse ID Amplitude [wait-times] telemwait=2000 ; Time to wait before sending most telemetry idwait=500 ; Time to wait before starting ID unkeywait=2000 ; Time to wait after unkey before sending CT's and link telemetry calltermwait=2000 ; Time to wait before announcing "call terminated" [nodes] 40821 = radio@127.0.0.1/40821,NONE ; This must be changed to your node number 902 = radio@127.0.0.1/902,NONE [memory] [macro]

-- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net