For putt, cor, and audio in and out you have to open the radio and add a pigtail. Www.arcomcontrollers.com<http://Www.arcomcontrollers.com> the info in the controller manual. For frequency control you need a kpg-4 cable between a free com port and the mic jack Jamey WR4JW Sent from my iPhone On May 24, 2015, at 16:29, David Shaw <shawpbx@gmail.com<mailto:shawpbx@gmail.com>> wrote: Hello Everyone, Does anyone have the pinout for the TM-271a to the URI? Also the rpt.conf file setup so I can use the TM-271a as a simplex and a freq agile remote? I know at one time you could have both simplex and an agile node. -- In 1988, America was strong. We had Ronald Reagan, Steve Jobs, Johnny Cash, and Bob Hope. Today, we have Obama, no Jobs, no Cash, and no Hope. Thanks, David _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.