At 01:19 PM 8/6/2012, Michael J. Wolthuis wrote:

Content-Type: multipart/alternative; boundary="----=_NextPart_000_0CFB_01CD7360.CABB2750" Content-Language: en-us

I am wondering if connections can be enabled to an allstar node configured as an Experimental IRLP station? I think I have seen this done, I know this is acceptable to IRLP as it is inbound only, but I haven't found any info on how to configure it.

I would like to configure exp0049 on one of my allstar nodes.

Experimental is inbound only, not able to make calls out.

Is this something that can be done and is found acceptable?

Certainly no issue from the IRLP side of things. You need to make a change to the IRLP node's environment file. ALLOW_EXPERIMENTAL=YES if my rusty memory is working. Can't easily double check at this time. :( I think you also need to let Dave Cameron know the IP address or hostname of the experimental system (i.e. the AllStar node/conference). Finally, on the AllStar side of things, you would need to use a version that has IRLP support (i.e. rather old now), or use thelinkbox to accept the incoming IRLP connections and pass audio to the AllStar node. 73 de VK3JED / VK3IRL http://vkradio.com