Using portal config for the first time and found an issue that there must be a work around for: I have two things I need always in rpt.conf, a node number's inside IP address 2360=radio@192.168.1.100:4569/2360,NONE because from inside the AT&T gateway I cannot get to its public address. So for testing now I need to connect with an entry in rpt.conf under [nodes] Also I need a startup macro to connect to a node I edit this in to the file but as soon as I do a portal upload these two things go away. Is there any way for portal config to allow stuff like this? Thanks all... GeorgeC W2DB/2360 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5710 office 401-338-0568 cel george@w2db.com