Yes please sign me up. User: wb2ers Password: wb2ers I assume I can change the password once I have a login Mark DuMoulin WB2ERS Wb2ers@metcom.com C 800-410-3130 -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Thursday, October 29, 2015 8:38 PM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 80, Issue 104 Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: DIAL Question (Corey Dean) 2. Re: DIAL simpleusb (Tim Sawyer) 3. Re: UIR Startup (Mark DuMoulin @ WB2ERS) 4. Re: UIR Startup (Steve N4IRS) 5. Re: AMBE question (Bryan Fields) 6. Re: AMBE question (ronald simpson) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Oct 2015 12:18:58 -0400 From: Corey Dean <n3fe@repeater.net> To: David McGough <kb4fxc@inttek.net> Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] DIAL Question Message-ID: <D3C84F7B-CF9A-4B21-A85C-E92319C8BEB3@repeater.net> Content-Type: text/plain; charset=us-ascii Yes! I ran it that way with an r100 for a few weeks before moving it over to the msf5000. I had no issues running simpleusb and usbradio. I don't have any of the cracks or pops anywhere that you are referring to running usbradio. I do know what you are talking about but I have never experienced that on any of my equipment. Sent from my iPhone

On Oct 29, 2015, at 10:14 AM, David McGough <kb4fxc@inttek.net> wrote:

Has anyone tested the simpleusb driver with the RPi2 version of DIAL?

...

On Thu, 29 Oct 2015, Corey Dean wrote:

I thought I had replied to everyone and I noticed I only replied to Neil. I have been running the Debian rpi2 image for quite a while. Way back when Steve first created it. I run it in full duplex mode using usbradio on an msf5000 with no issues at all.

I know what you are talking about with the echo issue. That seems to just be a problem on the arch image on the hamvoip site as that is the only place I have heard it. I did try that image long and and having audio delays at almost 10 seconds and time just made it unusable. That was even using simpleusb. No problems running usbradio and dsp on the Debian image.

To make a long story short, the Debian image just works! No have had zero issues with it.

Corey N3FE

Sent from my iPhone

...

On Oct 29, 2015, at 8:46 AM, Jon Rorke <jrorke@cogeco.ca> wrote:

I have been playing with the full duplex mode using DSP decode (PL, carrier squelch) in and out on the RPI2 with DIAL and so far it seems to be on par with what Acid does on a PC.

There is some latency due to audio processing but its about 200 to 250 ms and seems to be stable. I have never seen an acid box with 0 latency on the full duplex audio.

In may opinion it woks just as well as an ACID set up on a pc for a single full duplex repeater node.

Can;t speak to the other questions though.

Jon VA3RQ

...

On 10/28/2015 5:48 PM, Neil k8it wrote: I have been waiting a bit before I start playing with DIAL on a RPI2. I still have two questions 1. Does the RPI2 DIAL version solve the tx echo buffer issue that the current version of Asterisk RPI2 code has. The fix to this issue seems to be taking a long time. 2. Some users have reorted that a lot of modules have been disabled, such as the Echolink channel driver and others. 3. With the new Mini-DV4 dongle $125 and the amount of capability, has anybody wrote a channel driver to tie the Yaesu Fusion Wires-X network into DIAL. It appears that most of the documentation is out there, we just need someone to write the channel driver

Thanks 73 Neil Sablatzky K8IT Allstar Node 41838 KITLINK Allstar Node 42087 KITLINK HUB IRLP Node exp0068 Echolink K8IT-L WIRES-X K8IT 11479 Room 21479

From: Steve N4IRS Sent: Tuesday, October 27, 2015 10:35 AM To: N7MTC . ; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Procedure for loading DIAL on a R-Pi2 or a PC

Mac, The RPi2 install is pretty much download the image, burn it to SD card,. Once the Pi boots, you can login on the HDMI / USB console, or SSH into the board on port 222. The board is setup for DHCP so check your DHCP (router) server for address. If you want, you can login via the built in serial port at 115,200 System will walk you through setup.

FAQ for DIAL is at: <http://docs.allstarlink.org/drupal/node/170>

73, Steve N4IRS

...

On 10/27/2015 10:20 AM, N7MTC . wrote: Is there a procedure for loading the "new" DIAL version of asterisk for Raspberry pi2?

I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x using the Arcom RC-210 and the Arcom ADR. I noticed DIAL has replaced ACID as the latest flavor of asterisk for both PC and PI2. I have not found any install write-ups or YouTubes showing a DIAL install.

Regardless of which platform I will need to use an USB to Serial adapter to connect the ALLSTAR node to the repeater controller. It will be of the FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232.

/73 Mac, N7MTC

Benjamin Franklin - "Those who surrender freedom for security will not have, nor do they deserve, either one."

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6173 / Virus Database: 4455/10900 - Release Date: 10/27/15

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

------------------------------ Message: 2 Date: Thu, 29 Oct 2015 10:25:28 -0700 From: Tim Sawyer <tisawyer@gmail.com> To: Steve N4IRS <szingman@msgstor.com> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] DIAL simpleusb Message-ID: <CAG3ht9uW80TNGu9BGZghqGg3FozagJ_dmrwJFA3Ygo5XjzmhAg@mail.gmail.com> Content-Type: text/plain; charset="utf-8" Working fine including GPIO. On Thursday, October 29, 2015, Steve N4IRS <szingman@msgstor.com> wrote:

Yes, No errors reported.

...

Has anyone tested the simpleusb driver with the RPi2 version of DIAL?

-- ,,, (o o) -----ooO-(_)-Ooo------ --- N4IRS was Here ---

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- -- Tim