Hi All, I have a very simple setup. We're building a stand alone repeater with one voting receiver and putting a WLAN link it to tie the two together. So rpt.conf [1] rxchannel = Voter/1 duplex = 2 hangtime=100 althangtime=100 totime = 495000 voter.conf [general] port = 667 buflen = 125 password = **** [1] client1 = rtcm1,transmit,master client2 = rtcm2 txctcss = 100.0 txctcsslevel = 30 txtoctype = phase txprelim = yes thresholds = 255,1=10:20 mixminus = y About as simple as it gets. I have a device with requires me to poll it via DTMF. As it stands I can't get DTMF to repeat out of the transmitter. App-rpt mutes the audio. Any ideas on how I can get this to work? I don't need to control any of asterisk's functions with DTMF. I can see chan_voter.c:1529 voter_mix_and_send: Voter 1 Got DTMF char 5 so I know it's decoding. Everything I've read deals with sending DTMF to another node and out to RF, but this is keeping DTMF inside the same node. Thanks, Jesse