Hi everyone... I am in the process of setting up the CM-108 Sound FOB and found a discrepancy between the directions and the schematic! The directions say to connect the twisted connection of the 68K resister and the 470K resister to the connectors Pin 3 and the open end of the 470K to the white wire... However the schematic shows the 470k going to pin 3 and the 68K going to Pin 5 (ground) and the connection of both the resisters going to the white wire... Before I get this thing together and find it does not work... Can someone tell me which is correct? I have the hard stuff done... IE getting that dadgum resister connected to the CM108 chip!! Heheh Thanks in advance! Roger W4RFJ