Perhaps you could utilize the discpgm function to execute a script which then passes a command to app_rpt to play a message ;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you specify on disconnect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being disconnected from us (them) Steve On 9/19/2011 10:31, Keith wrote:

Hi All,

Its Keith G7DNT running MB7IIP nodes on 2m and 70cm. I would like to know if anyone knows how to add a audio output that quote" Link is disconnecting" or similar. I have a lot of older folk who don't understand when they send *51 and only a bleep is sent it's not enough many have been told to then send *7 but most forget and I end up with multiple connections.

Many thanks

Keith

G7DNT

Nodes:

5503 IRLP

5503 Echo link

2498 & 27333 All-Star

www.g7dnt.co.uk

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users