Mike, OK, you do need to make sure all nodes have the proper informatio9n to connect in BOTH directions. If private that would be specific node entries in rpt.conf. Also make sure you use the port when defining if not 4569. Of course wherever you are trying to connect to has to be connectible and the port of the node you are connecting to has to have its port forwarded if it is behind a NAT. Happy Holidays! 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Wed, 24 Dec 2014 15:31:24 -0500 From: mike.lussier@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Subject: Linking private network nodes to hub Doug, Thank you . I'm making progress here. I do see where the one node 41470 states connecting. and nothing shows on 41201. The problem could be the mesh nodes and I need open ports for the connect to complete. I bounced the 41201 hub that didn't seem to help. Any thoughts ? Mike Merry Christmas and a happy holiday season to ALL !! -- "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.