No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet. Mike WM4B On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:
Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73
On Jun 28, 2018, at 6:12 PM, Mike <mm@midnighteng.com> wrote:
Mike,
Still a lot of possibilities of things that may not be right but,
Just so that you are conducting a 'good test' behind your nat through wifi,
put your phone in airplane mode, then turn just the wifi on and connect.
You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect,
guessing your using the android iaxrpt.... like this for your IP...
192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway,
Let me know if your still having issues.
Oh... don't forget to get back out of airplane mode / turn cellular back on when done.
Hate to see ya late for dinner ...lol ...mike/kb8jnm
On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address.
I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything.
The port is open for both UDP and TCP connections. The firewall seems ok.
It has to be something obvious. What did I miss?
Mike
WM4B
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Please check out https://wiki.allstarlink.org/wiki/Main_Pagehttps://wiki.allstarlink.org/wiki... which contains lots of good info. Here are a few things to be aware of. Before attempting to connect (link) any device to the node, set the node up first, so you have an operating node, which means Asterisk is happy. The node is controlled (read that as setup) by configuring it, changing the *.config files in /etc/asterisk If using a DMK Engineering URI or URIx (or similar device), the green light continually blinks when Asterisk is running and happy. If the green light is solid, not blinking, Asterisk is not happy, and likely not running. It may be happy, but the node not fully setup. Each time a change is made to one of the config files, asterisk must be restarted for the changes to be effective. If you make a change and restart asterisk, and the green light no longer blinks, reverse your change and figure out what you may have done incorrectly. Most of all, take time to learn and enjoy the asterisk experience. Thanks, Bob K6ECM 73
On Jun 29, 2018, at 3:58 AM, mwbesemer@cox.net wrote:
No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet.
Mike WM4B
On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:
Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73
On Jun 28, 2018, at 6:12 PM, Mike <mm@midnighteng.com> wrote:
Mike,
Still a lot of possibilities of things that may not be right but,
Just so that you are conducting a 'good test' behind your nat through wifi,
put your phone in airplane mode, then turn just the wifi on and connect.
You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect,
guessing your using the android iaxrpt.... like this for your IP...
192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway,
Let me know if your still having issues.
Oh... don't forget to get back out of airplane mode / turn cellular back on when done.
Hate to see ya late for dinner ...lol ...mike/kb8jnm
On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address.
I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything.
The port is open for both UDP and TCP connections. The firewall seems ok.
It has to be something obvious. What did I miss?
Mike
WM4B
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
PS. The link below assumes you are using ASL from AllstarLink.org. There are a lot of similarities, but it is not the same as hamvoip. Thanks, Bob K6ECM 73
On Jun 29, 2018, at 7:01 AM, Bob Pyke <k6ecm1@gmail.com> wrote:
Please check out https://wiki.allstarlink.org/wiki/Main_Pagehttps://wiki.allstarlink.org/wiki... which contains lots of good info. Here are a few things to be aware of.
Before attempting to connect (link) any device to the node, set the node up first, so you have an operating node, which means Asterisk is happy.
The node is controlled (read that as setup) by configuring it, changing the *.config files in /etc/asterisk
If using a DMK Engineering URI or URIx (or similar device), the green light continually blinks when Asterisk is running and happy. If the green light is solid, not blinking, Asterisk is not happy, and likely not running. It may be happy, but the node not fully setup.
Each time a change is made to one of the config files, asterisk must be restarted for the changes to be effective. If you make a change and restart asterisk, and the green light no longer blinks, reverse your change and figure out what you may have done incorrectly.
Most of all, take time to learn and enjoy the asterisk experience.
Thanks, Bob K6ECM 73
On Jun 29, 2018, at 3:58 AM, mwbesemer@cox.net wrote:
No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet.
Mike WM4B
On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:
Did you add your local node address for each node in the rpt,conf [nodes] stanza? Thanks, Bob K6ECM 73
On Jun 28, 2018, at 6:12 PM, Mike <mm@midnighteng.com> wrote:
Mike,
Still a lot of possibilities of things that may not be right but,
Just so that you are conducting a 'good test' behind your nat through wifi,
put your phone in airplane mode, then turn just the wifi on and connect.
You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect,
guessing your using the android iaxrpt.... like this for your IP...
192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway,
Let me know if your still having issues.
Oh... don't forget to get back out of airplane mode / turn cellular back on when done.
Hate to see ya late for dinner ...lol ...mike/kb8jnm
On 6/28/2018 8:00 PM, Mike Besemer wrote: Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address.
I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything.
The port is open for both UDP and TCP connections. The firewall seems ok.
It has to be something obvious. What did I miss?
Mike
WM4B
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Most new routers won't allow you to exit the local network (LAN) and come back in. This might happen if you use a domain name that is associated with your public address. If you want to use your public domain name to access your node from inside your LAN. You'll need to add a DNS entry to your router. **See "Side Note" below By default IAX2 uses UDP port 4569 and the bind address is set to all interfaces/addresses in the ASL OS (allstarlink.org). As for the hamvoip.com settings, you should check with them. Are you using the hostname or IP address to access your node? Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices. Testing:
From your windows based computer. Try tracert and the IPaddress of the node.
tracert 192.168.x.x 1 <1 ms <1 ms <1 ms 192.168.x.x There should be only one hope to your node if your windows computer in on the same network. Side note: I use dhcp on all my nodes on my LAN networks. I give them static address via the DHCP server. I also change the hostname on the node. i.e. asl2060 This allows the router's internal DNS server to associate the hostname and IP address for the ASL node. Some routers will allow you to add a domain name. Also there is no need to open TCP port forwarding on you router for IAX2 4569. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer@cox.net> wrote:
No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet.
Mike WM4B
On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:
Did you add your local node address for each node in the rpt,conf [nodes]
stanza? Thanks, Bob K6ECM 73
On Jun 28, 2018, at 6:12 PM, Mike <mm@midnighteng.com> wrote:
Mike,
Still a lot of possibilities of things that may not be right but,
Just so that you are conducting a 'good test' behind your nat through wifi,
put your phone in airplane mode, then turn just the wifi on and connect.
You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect,
guessing your using the android iaxrpt.... like this for your IP...
192.169.1.101:4569 < :port especially if not the norm, but do it anyway. That's a few things to investigate anyway,
Let me know if your still having issues.
Oh... don't forget to get back out of airplane mode / turn cellular back on when done.
Hate to see ya late for dinner ...lol ...mike/kb8jnm
On 6/28/2018 8:00 PM, Mike Besemer wrote:
Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address.
I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at hamvoip.com and have double checked everything.
The port is open for both UDP and TCP connections. The firewall seems ok.
It has to be something obvious. What did I miss?
Mike
WM4B
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Bob Pyke -
David Shaw -
mwbesemer＠cox.net