Re: [App_rpt-users] App_rpt-users Digest, Vol 29, Issue 19
Yes, thanks its working and on line. Next question is how do I adjust tx/rx audio for each port on the LOX. "Radio-tune-menu" doesnt seem to exist. Ken On Sat, Jul 16, 2011 at 9:00 AM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. CURL error (George Csahanin) 2. Exp reflector (Neal Garbenis) 3. Re: Exp reflector (Bryan Boyle) 4. Re: Echolink Ka-CHunk nodes? (Phil N6TCT) 5. Re: Exp reflector (Neal Garbenis) 6. FWIW... (Bryan D. Boyle) 7. Re: Pico node configuration (Dale Weber)
---------- Forwarded message ---------- From: "George Csahanin" <george@dyb.com> To: "app_rpt mailing list" <app_rpt-users@ohnosec.org> Date: Fri, 15 Jul 2011 12:13:45 -0500 Subject: [App_rpt-users] CURL error ** When trying to use the web transciever I get this:
ERROR[26440]: pbx.c:1550 ast_func_read: Function CURL not registered
I do have curl...:
[root@radio ~]# curl --help Usage: curl [options...] <url> Options: (H) means HTTP/HTTPS only, (F) means FTP only -a/--append Append to target file when uploading (F) -A/--user-agent <string> User-Agent to send to server (H) --anyauth Pick "any" authentication method (H) -b/--cookie <name=string/file> Cookie string or file to read cookies from (H) --basic Use HTTP Basic Authentication (H) -B/--use-ascii Use ASCII/text transfer -c/--cookie-jar <file> Write cook
What is "*Function CURL not registered"* ** ??
GeorgeC W2DB **
---------- Forwarded message ---------- From: Neal Garbenis <njgarbenis@gmail.com> To: app_rpt-users@ohnosec.org Date: Fri, 15 Jul 2011 17:44:26 -0400 Subject: [App_rpt-users] Exp reflector I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped.
My question is has anyone done this before. If so how did you do it? My irlp exp is 0054.
Neal
---------- Forwarded message ---------- From: Bryan Boyle <bdboyle@bdboyle.com> To: Neal Garbenis <njgarbenis@gmail.com> Date: Fri, 15 Jul 2011 18:07:24 -0400 Subject: Re: [App_rpt-users] Exp reflector support for irlp was taken out by the authors of asterisk at Cameron's demand...did not want asterisk to cross connect to 'his' network, from what I understand. those closer please feel free to fill in or correct.
-- Bryan Sent from my iPhone please forgive misspellings...
On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis@gmail.com> wrote:
I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped.
My question is has anyone done this before. If so how did you do it? My irlp exp is 0054.
Neal _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
---------- Forwarded message ---------- From: Phil N6TCT <phil.n6tct@gmail.com> To: Ken Page <vk4akp@yahoo.com.au> Date: Fri, 15 Jul 2011 16:25:42 -0700 Subject: Re: [App_rpt-users] Echolink Ka-CHunk nodes? Hi Ken.
I have not seen this exact problem, but I have seen a problem where echolink users connect to our allstar/echolink node but no audio is passed. They can key up the node but it just transmits a carrier with no audio. For some, possibly most, echolink users it works just fine. I have chalked this up to either bad audio configuration on the echolink user's end or bad port forwarding configuration, but have not done any real investigation.
I have not seen the continuous kerchunking that you describe. (And I hope that I don't, that sounds super annoying!) Sorry ...
Phil, N6TCT
On Thu, Jul 14, 2011 at 8:21 PM, Ken Page <vk4akp@yahoo.com.au> wrote:
Hi,
I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just log in and then I'm left with a connection that just key's up and down constantly every few seconds with no audio all day until I notice and hang it up..
Do I need to update some of the All_Star software or something to get around this?
It's something that has only started in the last month or so.
73 de Ken - vk4akp@gmail.com All_Star:2134 - vk4rkp - 146.725Mhz -Neg. Echolink: 7878 .-.-. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
---------- Forwarded message ---------- From: Neal Garbenis <njgarbenis@gmail.com> To: Bryan Boyle <bdboyle@bdboyle.com> Date: Fri, 15 Jul 2011 19:30:29 -0400 Subject: Re: [App_rpt-users] Exp reflector Yes you are correct but it is ok to have exp reflectors to tie both networks together. This is what I am trying to do
Sent from my iPhone
On Jul 15, 2011, at 6:07 PM, Bryan Boyle <bdboyle@bdboyle.com> wrote:
support for irlp was taken out by the authors of asterisk at Cameron's demand...did not want asterisk to cross connect to 'his' network, from what I understand. those closer please feel free to fill in or correct.
-- Bryan Sent from my iPhone please forgive misspellings...
On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis@gmail.com> wrote:
I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped.
My question is has anyone done this before. If so how did you do it? My irlp exp is 0054.
Neal _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
---------- Forwarded message ---------- From: "Bryan D. Boyle" <bdboyle@bdboyle.com> To: app_rpt mailing list <app_rpt-users@ohnosec.org> Date: Fri, 15 Jul 2011 22:34:06 -0400 Subject: [App_rpt-users] FWIW... Some photos of the installation of active nodes 27294/27295/27774 (others are in abeyance, running under pseudo/usbxxxxx)
Hope no one minds posting the URL. It's a work in progress...
http://www.wb0yle.com/rptr.htm
73 BB WB0YLE
---------- Forwarded message ---------- From: Dale Weber <n7pkt@picklejar.org> To: app_rpt-users@ohnosec.org Date: Fri, 15 Jul 2011 20:02:19 -0700 Subject: Re: [App_rpt-users] Pico node configuration On Wednesday, July 13, 2011 07:10:22 PM Ken Leisten wrote:
Hi all,
Got Pickle Linux copied to a flash card and running on my beagleboard/LOX node. It walked me through changing some network settings for IP, gateway, subnet etc., but it never asked me for a node number or tried to download configuration from the allstar portal. I tried forcing a config through the portal but this doesn't seem to work either. What am I missing?
Got to node configuration, and select the server and node you want to run on Beagle/LOX. Then select your radio interface type as beagle (BeagleBoard-xM with LOX board). Then you will see a selection for port. Port 1 is closest to the Ethernet connector on Beagle. Finally, download the server configuration with your node to the Beagle with/LOX.
That should do it!
8-Dale
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (1)
-
Ken Leisten