passing a commnad to the kernel
I need to pass the noapic command to my acid install, on a real centos 5.x I can choose F3 (kernel) and type noapic, but I dont have this option with acid. Anyone can help
Hi Pierre, You need to edit a file : vi /boot/grub/grub.conf and add "acpi=off noapic quiet" at the end of the line including the kernel instructions. Then, you must save the modified file by entering the VI instruction : ESC wq ENTER 73, F6HQZ Francois # ------------------------------ # Example of grub.conf file : # ------------------------------ # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root sda1 # kernel /vmlinuz-version ro root=/dev/md2 # initrd /initrd-version.img #boot=/dev/sda default=0 timeout=10 splashimage=(hd0,0)/grub/AsteriskNOW-splash.xpm.gz title AsteriskNOW Release beta_1 (2.6.22.9-0.1.smp.gcc3.4.x86.i686) root (hd0,0) kernel /vmlinuz-2.6.22.9-0.1.smp.gcc3.4.x86.i686 ro root=/dev/md2 acpi=off noapic quiet initrd /initrd-2.6.22.9-0.1.smp.gcc3.4.x86.i686.img
What is the most common hardware that everyone is using to connect Asterisk to radios?
Dmk URI or modified usb fob based on cm108 or cm109 ship. Envoyé de mon iPad Le 27 Feb 2013 à 16:45, "Jamie A. Stapleton" <jamie.stapleton@gmail.com> a écrit :
What is the most common hardware that everyone is using to connect Asterisk to radios? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
dmk engineering URI if you don't feel like (or don't have the skills to roll your own). if you go that route..pay the extra for the memory chip. running 7 of them on 2 boxes. idiot proof. -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings... On Feb 27, 2013, at 16:45, "Jamie A. Stapleton" <jamie.stapleton@gmail.com> wrote:
What is the most common hardware that everyone is using to connect Asterisk to radios? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I also highly recommend the DMK URI box. It just doesn't get any easier than that. The only other important option is the Micro-Node RTCM module which is very handy if you can't locate the radio and URI near the Asterisk box. (You will need some internet connectivity where the radio and RTCM box is located, but then the asterisk box can be anywhere.) http://micro-node.com/thin-m1.html On 2/27/2013 2:02 PM, Bryan D. Boyle wrote:
dmk engineering URI if you don't feel like (or don't have the skills to roll your own).
if you go that route..pay the extra for the memory chip.
running 7 of them on 2 boxes. idiot proof.
-- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings...
On Feb 27, 2013, at 16:45, "Jamie A. Stapleton" <jamie.stapleton@gmail.com> wrote:
What is the most common hardware that everyone is using to connect Asterisk to radios? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (6)
-
Bryan D. Boyle -
Don Hackler -
F6HQZ -
Jamie A. Stapleton -
pete M -
Pierre Martel