Simplex. Simplex linking a node to a repeater is a terribly bad idea! Please don't do this. This puts squelch tails on all the connected systems when you unkey, as the repeater sends back a squelch tail to the node which transmits it over the network. I don't know about the policies of other node operators, but I don't have much tolerance for this. I'll disconnect any node connected to my node which is doing this. The right way to do this is to have anothe radio at the repeater site on a separate channel from the repeater output as a remote base on the repeater. This way there's no squelch tail. On Fri, Oct 29, 2010 at 3:48 PM, Darril Holland wrote: I have my Allstar node-server hooked up to radio tx/rcv(at my house) to my local repeater. In the Allstar portal should I be configuared as simplex, remote base, or hub? My setup is not at repeater site or physcally wired to the repeater. Tnx, Darril/WD5GJP ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com <javascript:parent.wgMail.openComposeWindow('App_rpt-users@qrvc.com')>   <javascript:parent.wgMail.openComposeWindow('App_rpt-users@qrvc.com')> http://qrvc.com/mailman/listinfo/app_rpt-users <http://qrvc.com/mailman/listinfo/app_rpt-users>   <http://qrvc.com/mailman/listinfo/app_rpt-users>