Thanks Paul. ----- Reply message ----- From: "Paul J. Agamata" <Sysman@Xceptions.COM> Date: Fri, Aug 12, 2011 9:25 pm Subject: [App_rpt-users] MDC Status Reply not working with XTS model radios To: "Tony KT9AC" <kt9ac@ameritech.net>, "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> I have the same issues between two radios. My XTS-5000 responds properly but my XTS-3000 does not. I'll do some digging this weekend to see where the issue is. Because my XTS-5000 functions properly, it's probably a codeplug issue. Paul On 8/12/11 4:18 PM, "Tony KT9AC" <kt9ac@ameritech.net> wrote:

This might not be a widely-used feature, but I wanted to post it here first versus directly to Jim (to follow the rules).

There is a feature within App_rpt where you can send MDC1200 status messages and have commands acted upon. I've used a MCS2000 mobile and Astro Saber successfully for a very fast and efficient control method. Recently I sold my Astro Saber and bought an XTS3000. I can still send MDC statuses and get them acted upon, but no longer get the "ACK" back from Allstar.

No changes in software and the logs show the op=46 like before and the proper Unit ID and status sent...so I'm at a loss of why Allstar stops trying to ACK these statuses for this one type of radio (my mobile still works fine). Debug suggestions and code testing welcome.

Thanks, Tony

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users