Sorry for the slow response, I've been out of town. Put telemdefault=2 under your node stanza, not the telemetry stanza. ie... [1999] telemdefault=2 -- Tim :wq On Nov 25, 2011, at 4:12 AM, Lu Vencl wrote:

Ok, I thing I understand. So I put this in under my current telemetry entry [telemetry] telemdefault=2 It however does not seem to work according to the value specified in the docs..

But it seems like it broke my courtesy beeps configuration now oddly enough.

-----Original Message----- From: Tim Sawyer [mailto:tim.sawyer@me.com] Sent: Friday, November 25, 2011 1:13 AM To: Lu Vencl; App_rpt-users@ohnosec.org list Subject: Re: [App_rpt-users] Echolink

No, not just anywhere. Stanzas are parts of an Asterisk file denoted by square brackets []. See http://ohnosec.org/drupal/node/39

So, the node stanza is the part of the rpt.conf file after [your node number] and before the next set of square brackets.

Hope that helps. Have a Happy Thanksgiving. -- Tim :wq

On Nov 24, 2011, at 10:20 AM, Lu Vencl wrote:

...

Tim. Sorry I guess I am not well educated in this. So I just add a line anywhere in the file? Happy Thanksgiving

Sent from my iPhone, Lu Vencl

On Nov 24, 2011, at 11:51 AM, Tim Sawyer <tim.sawyer@me.com> wrote:

...

You'll need to add it to the node stanza of rpt.conf. -- Tim :wq

On Nov 24, 2011, at 2:29 AM, Lu Vencl wrote:

...

Tim, Thanks for the info.. Which conf file will I find this in? I looked in rpt and could not find it. Thanks

-----Original Message----- From: Tim Sawyer [mailto:tim.sawyer@me.com] Sent: Wednesday, November 23, 2011 10:06 AM To: Lu Vencl Cc: App_rpt-users@ohnosec.org list Subject: Re: [App_rpt-users] Echolink

Sure. Take a look at this link. http://ohnosec.org/drupal/node/103

-- Tim :wq

On Nov 23, 2011, at 3:17 AM, Lu Vencl wrote:

...

Hey Tim, Did not know about this "timed telemetry". Can you tell me more about it? How do I set it up? Thanks Lu KA4EPS

-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer Sent: Monday, November 21, 2011 9:32 PM To: Matt Roberts Cc: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink

Timed telemetry will announce when you initiate a connection and for a short time thereafter. Incoming connections are not announced except when one happens to come in during the timeout period. -- Tim :wq

On Nov 21, 2011, at 11:40 AM, Matt Roberts wrote:

...

If I don't want to have all Echolink incoming connections announced, is there a way to have outgoing connections announced? If I set Echolink telemetry to timed, how does that work?

Matt Roberts n9gmr@me.com

Sent from my iPhone _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users